Слике страница
PDF
ePub

is the component material of chief value, not specially provided for in this section, forty-five per centum ad valorem.

110. Fusible enamel, twenty-five per centum ad valorem; opal or cylinder glass tiles or tiling, sixty per centum ad valorem.

111. Marble and onyx, in block, rough or squared only, sixty-five cents per cubic foot; marble and onyx, sawed or dressed, over two inches in thickness, one dollar per cubic foot; slabs or paving tiles of marble or onyx, containing not less than four superficial inches, if not more than one inch in thickness, eight cents per superficial foot; if more than one inch and not more than one and one-half inches in thickness, ten cents per superficial foot; if more than one and one-half inches and not more than two inches in thickness, twelve and one-half cents per superficial foot; if rubbed in whole or in part, two cents per superficial foot in addition; mosaic cubes of marble or onyx, not exceeding two cubic inches in size, if loose, one-fourth of one cent per pound and twenty per centum ad valorem; if attached to paper or other material, five cents per superficial foot and thirty-five per centum ad valorem.

112. Marble, breccia, onyx, alabaster, and jet, wholly or partly manufactured into monuments, benches, vases, and other articles, or of which these substances or either of them is the component material of chief value, and all articles composed wholly or in chief value of agate, rock crystal, or other semiprecious stones, except such as are cut into shapes and forms fitting them expressly for use in the construction of jewelry, not specially provided for in this section, fifty per centum ad valorem.

113. Burrstones, manufactured or bound up into millstones, fifteen per centum ad valorem.

114. Freestone, granite, sandstone, limestone, and all other monumental or building stone, except marble, breccia, and onyx, not specially provided for in this section, hewn, dressed, or polished, or otherwise manufactured, fifty per centum ad valorem; unmanufactured, or not dressed, hewn, or polished, ten cents per cubic foot.

115. Grindstones, finished or unfinished, one dollar and seyenty-five cents per ton.

116. Slates, slate chimney pieces, mantels, slabs for tables, roofing slates, and all other manufactures of slate, not specially provided for in this section, twenty per centum ad valorem.

Schedule C.—Metals and Manufactures of 117. Iron ore, including manganiferous iron ore, and the dross or residuum from burnt pyrites, fifteen cents per ton: Provided, That in levying and collecting the duty on iron ore no deduction shall be made from the weight of the ore on account of moisture which may be chemically or physically combined therewith.

118. Iron in pigs, iron kentledge, spiegeleisen, and ferromanganese, two dollars and fifty cents per ton; wrought and cast scrap iron, and scrap steel, one dollar per ton; but nothing shall be deemed scrap iron or scrap steel except waste or refuse iron or steel fit only to be remanufactured by melting, and excluding pig iron in all forms.

119. Bar iron, muck bars, square iron, rolled or hammered, comprising flats not less than one inch wide nor less than

or

three-eighths of one inch thick, round iron not less than sevensixteenths of one inch in diameter, three-tenths of one cent per pound.

120. Round iron, in coils or rods, less than seven-sixteenths of one inch in diameter, and bars or shapes of rolled or hammered iron, not specially provided for in this section, six-tenths of one cent per pound: Provided, That all iron in slabs, blooms, loops, or other forms less finished than iron in bars, and more advanced than pig iron, except castings, shall be subject to a duty of four-tenths of one cent per pound: Provided further, That all iron bars, blooms, billets, slabs or loops, in the manufacture of which charcoal is used as fuel, shalı be subject to a duty of eight dollars per ton.

121. Beams, girders, joists, angles, channels, car-truck channels, TT, columns and posts or parts or sections of columns and posts, deck and bulb beams, and building forms, together with all other structural shapes of iron or steel, not assembled, or manufactured, or advanced beyond hammering, rolling, or casting, valued at nine-tenths of one cent per pound or less, three-tenths of one cent per pound; valued above nine-tenths of one cent per pound, four-tenths of one cent per pound.

122. Boiler or other plate iron or steel, except crucible plate steel and saw plates hereinafter provided for in this section, not thinner than number ten wire gauge, cut or sheared to shape or otherwise, or unsheared, and skelp iron steel sheared or rolled in grooves, valued at eight-tenths of one cent per pound or less, three-tenths of one cent per pound; valued above eight-tenths of one cent and not above one cent per pound, four-tenths of one cent per pound; valued above one cent and not above two cents per pound, five-tenths of one cent per pound; valued above two cents and not above three cents per pound, six-tenths of one cent per pound; valued at over three cents per pound, twenty percentum ad valorem: Provided, That all sheets or plates of iron or steel thinner than number ten wire gauge shall pay duty as iron or steel sheets.

123. Iron or steel anchors or parts thereof, one cent per pound; forgings of iron or steel, or of combined iron and steel, but not machined, tooled, or otherwise advanced in condition by any process or operation subsequent to the forging process, not specially provided for in this section, thirty per centum ad valorem; antifriction balls, ball bearings, and roller bearings, of iron or steel or other metal, finished or unfinished, fortyfive per centum ad valorem.

124. Hoop, band, or scroll iron or steel, not otherwise provided for in this section, valued at three cents per pound or less, eight inches or less in width, and less than three-eighths of one inch thick and not thinner than number ten wire gauge, three-tenths of one cent per pound; thinner than number ten wire gauge and not thinner than number twenty wire gauge, four-tenths of one cent per pound; thinner than number twenty wire gauge, six-tenths of one cent per pound: Provided, That barrel hoops of iron or steel, and hoop or band iron or hoop or band steel flared, splayed or punched, with or without buckles or fastenings, shall pay one-tenth of one cent per pound more duty than that imposed on the hoop or band iron or steel from which they are made; bands and strips of steel, exceeding twelve feet in length, not specially provided for in this section, thirtyfive per centum ad valorem.

125. Hoop or band iron, or hoop or band steel, cut to lengths, or wholly or partly manufactured into hoops or ties, coated or not coated with paint or any other preparation, with or without buckles or fastenings, for baling cotton or any other com-' modity, three-tenths of one cent per pound.

126. Railway bars, made of iron or steel, and railway bars made in part of steel, Trails and punched iron or steel flat rails, seven-fortieths of one cent per pound; railway fish-plates or splice-bars, made of iron or steel, three-tenths of one cent per pound.

127. Sheets of iron or steel, common or black, of whatever dimensions, and skelp iron or steel, valued at three cents per pound or less, thinner than number ten and not thinner than number twenty wire gauge, five-tenths of one cent per pound; thinner than number twenty wire gauge and not thinner than number twenty-five wire gauge, six-tenths of one cent per pound; thinner than number twenty-five wire gauge and not thinner than number thirty-two wire gauge, eight-tenths of one cent per pound; thinner than number thirty-two wire gauge, nine-tenths of one cent per pound; corrugated or crimped, eight-tenths of one cent per pound; all the foregoing valued at more than three cents per pound, thirty per centum ad valorem: Provided, That all sheets or plates of common or black iron or steel not thinner than number ten wire gauge shall pay duty as plate iron or plate steel.

128. All iron or steel sheets or plates, and all hoop, band, or scroll iron or steel, excepting what are known commercially as tin plates, terne plates, and taggers tin, and hereinafter provided for, when galvanized or coated with zinc, spelter, or other metals, or any alloy of those metals, shall pay two-tenths of one cent per pound more duty than if the same was not so galvanized or coated; sheets or plates composed of iron, steel, copper, nickel, or other metal with layers of other metal or metals imposed thereon by forging, hammering, rolling, or welding, forty per centum ad valorem.

129. Sheets of iron or steel, polished, planished, or glanced, by whatever name designated, one and one-half cents per pound: Provided, That plates or sheets of iron or steel, by whatever name designated, other than the polished, planished, or glanced herein provided for, which have been pickled or cleaned by acid, or by any other material or process, or which are coldrolled, smoothed only, not polished, shall pay two-tenths of one cent per pound more duty than the corresponding gauges of common or black sheet iron or steel.

130. Sheets or plates of iron or steel, or taggers iron or steel, coated with tin or lead, or with a mixture of which these metals, or either of thern, is a component part, by the dipping or any other process, and commercially known as tin plates, terne plates, and taggers tin, one and two-tenths cents per pound.

131. Steel ingots, cogged ingots, blooms, and slabs, by whatever process made; die blocks or blanks; billets and bars and tapered or beveled bars; mill shafting; pressed, sheared, or stamped shapes, not advanced in value or condition by any process or operation subsequent to the process of stamping; hammer molds or swaged steel; gun-barrel molds not in bars; alloys used as substitutes for steel in the manufacture of tools; all descriptions and shapes of dry sand, loam, or iron-molded

steel castings; sheets and plates and steel not specially provided for in this section, all of the above valued at threefourths of one cent per pound or less, seven-fortieths of one cent per pound; valued above three-fourths of one cent and not above one and three-tenths cents per pound, three-tenths of one cent per pound; valued above one and three-tenths cents and not above one and eight-tenths cents per pound, fivetenths of one cent per pound; valued above one and eighttenths cents and not above two and two-tenths cents per pound. six-tenths of one cent per pound; valued above two and twotenths cents and not above three cents per pound, eight-tenths of one cent per pound; valued above three cents per pound and not above four cents per pound, one and one-tenth cents per pound; valued above four cents and not above seven cents per pound, one and two-tenths cents per pound; valued above seven cents and not above ten cents per pound, one and nine-tenths cents per pound; valued above ten cents and not above thirteen cents per pound, two and three-tenths cents per pound; valued above thirteen cents and not above sixteen cents per pound, two and seven-tenths cents per pound; valued above sixteen cents and not above twenty-four cents per pound, four and six-tenths cents per pound; valued above twenty-four cents and not above thirty-two cents per pound, six cents per pound; valued above thirty-two cents and not above forty cents per pound, seven cents per pound; valued above forty cents per pound, twenty per centum ad valorem.

132. Steel wool or steel shavings, forty per centum ad valorem.

133. Grit, shot, and sand made of iron or steel, that can be used only as abrasives, one cent per pound.

134. Wire rods: Rivet, screw, fence, and other iron or steel wire rods, whether round, oval, flat, or square, or in any other shape, and nail rods, all the foregoing in coils or otherwise, valued at four cents or less per pound, three-tenths of one cent per pound; valued over four cents per pound, six-tenths of one cent per pound: Provided, That all round iron or steel rods smaller than number six wire gauge shall be classed and dutiable as wire: Provided further, That all iron or steel wire rods which have been tempered or treated in any manner or partly manufactured shall pay an additional duty of one-half of one cent per pound.

135. Round iron or steel wire, not smaller than number thirteen wire gauge, one cent per pound; smaller than number thirteen and not smaller than number sixteen wire gauge, one

and one-fourth cents per pound; smaller than number sixteen wire gauge, one and three-fourths cents per pound: Provided, That all the foregoing shall pay duty at not less than thirty-five per centum ad valorem; all wire composed of iron, steel, or other metal except gold or silver, covered with cotton, silk, or other material, corset clasps, corset steels, dress steels, and all flat wires, and steel in strips, not thicker than number fifteen wire gauge and not exceeding five inches in width, whether in long or short lengths, in coils or otherwise, and whether rolled or drawn through dies or rolls, or otherwise produced, and all other wire not specially provided for in this section, shall pay a duty of not less than thirty-five per centum ad valorem; on iron or steel wire coated by dipping, galvanizing or similar process with zinc, tin, or other metal, there shall be paid two-tenths of one cent per pound in addition to the rate imposed on the wire of which it is made: Provided fur. ther, That articles manufactured wholly or in chief value of any wire or wires provided for in this paragraph shall pay the maximum rate of duty imposed in this section upon any wire used in the manufacture of such articles and in addition thereto one cent per pound: And provided further, That no article made from or composed of wire shall pay a less rate of duty than forty per centum ad valorem; telegraph, telephone, and other wires and cables composed of metal and rubber, or of metal, rubber, and other materials, forty per centum ad valorem; barbed fence wire, three-fourths of one cent per pound, but the same shall not be subject to any additional or other rate of duty herein before provided; wire heddles or healds, twentyfive cents per thousand, and in addition thereto, forty per centum ad valorem.

136. No article not specially provided for in this section, which is wholly or partly manufactured from tin plate, terne plate, or the sheet, plate, hoop, band, or scroll iron or steel herein provided for, or of which such tin plate, terne plate, sheet, plate, hoop, band, or scroll iron or steel shall be the material of chief value, shall pay a lower rate of duty than that imposed on the tin plate, terne plate, or sheet, plate, hoop, band, or scroll iron or steel from which it is made, or of which it shall be the component thereof of chief value.

137. On all iron or steel bars or rods of whatever shape or section which are cold rolled, cold drawn, cold hammered, or polished in any way in addition to the ordinary process of hot rolling or hammering, there shall be paid one-eighth of one cent per pound in addition to the rates provided in this section on bars or rods of whatever section or shape which are hot rolled; and on all strips, plates, or sheets of iron or steel of whatever shape, other than the polished, planished, or glanced sheet-iron or sheet-steel herinbefore provided for, which are cold hammered, blued, brightened, tempered, or polished by any process to such perfected surface finish or polish better than the grade of cold rolled, smoothed only, herein before provided for, there shall be paid four-tenths of one cent per pound in addition to the rates provided in this section upon plates, strips, or sheets of iron or steel of common or black finish of corresponding gauge or value; and on steel circular saw plates there shall be paid one-fourth of one cent per pound in addition to the rates provided in this section for steel plates.

138. No allowance or reduction of duties for partial loss or damage in consequence of rust or of discoloration shall be made upon any description of iron or steel, or upon any article wholly or partly manufactured of iron or steel, or upon any manufacture of iron or steel.

139. All metal produced from iron or its ores, which is cast and malleable, of whatever description or form, without regard to the percentage of carbon contained therein, whether produced by cementation, or converted, cast, or made from iron or its ores, by the crucible, Bessemer, Clapp-Griffith, pneumatic, Thomas-Gilchrist, basic, Siemens-Martin, or open-hearth process, or by the equivalent of either, or by a combination of two or more of the processes, or their equivalents, or by any fusion or other process which produces from iron or its ores a metal either granular or fibrous in structure, which is cast and

« ПретходнаНастави »