Слике страница
PDF
ePub

124. Veined marble, sawed, dressed, or otherwise, including marble slabs and marble paving-tiles, one dollar and ten cents per cubic foot (but in measurement no slab shall be computed at less than one inch in thickness).

Old law does not contain the words in parenthesis.

125. Manufactures of marble not specially provided for in this act, fifty per centum ad valorem.

STONE

126. Burr-stones manufactured or bound up into mill-stones, fifteen per centum ad valorem.

Old law: Twenty per centum.

127. Freestone, granite, sandstone, limestone, and other building or monumental stone, except marble, unmanufactured or undressed, not specially provided for in this act, eleven cents per cubic foot.

Old law: One dollar per ton.

128. Freestone, granite, sandstone, limestone, and other building or monumental stone, except marble, not specially provided for in this act, hewn, dressed, or polished, forty per centum ad valorem.

Old law: Twenty per centum.

129. Grindstones, finished or unfinished, one dollar and seventyfive cents per ton.

SLATE

130. Slates, slate chimney-pieces, mantels, slabs for tables, and all other manufactures of slate, not specially provided for in this act, thirty per centum ad valorem.

131. Roofing slates, twenty-five per centum ad valorem.

SCHEDULE C.-METALS AND MANUFACTURES OF.

IRON AND STEEL.

132. Chromate of iron, or chromic ore, fifteen per centum ad valorem.

133. Iron ore, including manganiferous iron ore, also the dross or residuum from burnt pyrites, seventy-five cents per ton. Sulphur ore, as pyrites, or sulphuret of iron in its natural state, containing not more than three and one-half per centum copper, seventy-five cents per ton: Provided, That ore containing more than two per centum of copper shall pay, in addition thereto, one-half of one cent per pound for the copper contained therein: Provided, also, That sulphur ore as pyrites or sulphuret of iron in its natural state, containing in excess of twenty-five per centum of sulphur, shall be free of duty, except on the copper contained therein, as above provided: And provided further, That in levying and collecting the duty on iron ore no deduction shall be made from the weight of the ore on account of moisture which may be chemically or physically com

bined therewith.

Old law: The copper was dutiable at two and one-half cents per pound. The last two provisos are new matter.

134. Iron in pigs, iron kentledge, spiegeleisen, ferro-manganese, ferro-silicon, wrought and cast scrap iron, and scrap steel, three

tenths of one cent per pound; but nothing shall be deemed scrap iron or scrap steel except waste or refuse iron or steel fit only to be remanufactured.

Old law: Did not contain ferro manganese or ferro silicon. The scrap iron was confined to that which had been in actual use.

135. Bar-iron, rolled or hammered, comprising flats not less than one inch wide, nor less than three-eighths of one inch thick, eighttenths of one cent per pound; round iron not less than three-fourths of one inch in diameter, and square iron not less than three-fourths of one inch square, nine-tenths of one cent per pound; flats less than one inch wide, or less than three-eighths of one inch thick; round iron less than three-fourths of one inch and not less than sevensixteenths of one inch in diameter; and square iron less than threefourths of one inch square, one cent per pound.

Old law: The respective rates were eight-tenths cent per pound, one cent per pound, one and one-tenth cents per pound. 136. Round iron, in coils or rods, less than seven-sixteenths of one inch in diameter, and bars or shapes of rolled iron, not specially provided for in this act, one and one-tenth cents per pound: Provided, That all iron in slabs, blooms, loops, or other forms less finished than iron in bars, and more advanced than pig-iron, except castings, shall be rated as iron in bars, and be subject to a duty of eight-tenths of one cent per pound; and none of the iron above enumerated in this paragraph shall pay a less rate of duty than thirtyfive per centum ad valorem: Provided further, That all iron bars, blooms, billets, or sizes or shapes of any kind, in the manufacture of which charcoal is used as fuel, shall be subject to a duty of not less than twenty-two dollars per ton.

Old law: One and two-tenths cent per pound.

137, Beams, girders, joists, angles, channels, car-truck channels, TT, columns and posts or parts or sections of columns and posts, deck and bulb beams, and building forms, together with all other structural shapes of iron or steel, whether plain or punched, or fitted for use, nine-tenths of one cent per pound.

Old law: One and one-fourth cents per pound.

. 138. Boiler or other plate iron or steel, except saw-plates hereinafter provided for, not thinner than number ten wire gauge, sheared or unsheared, and skelp iron or steel sheared or rolled in grooves, valued at one cent per pound or less, five-tenths of one cent per pound; valued above one cent and not above one and four-tenths cents per pound, sixty-five hundredths of one cent per pound; valued above one and four tenths cents and not above two cents per pound, eight tenths of one cent per pound; valued above two cents and not above three cents per pound, one and one-tenth cents per pound; valued above three cents and not above four cents per pound, one and five-tenths cents per pound; valued above four cents and not above seven cents per pound, two cents per pound; valued above seven cents and not above ten cents per pound, two and eight-tenths cents per pound; valued above ten cents and not above thirteen cents per pound, three and one-half cents per pound; valued above thirteen cents per pound, forty-five per centum ad valorem: Provided, That all plate iron or steel thinner than number ten wire gauge shall pay duty as iron or steel sheets.

Old law: Boiler or other plate iron, one and one-fourth cents per pound if iron; forty-five per centum if steel.

139. Forgings of iron or steel, or forged iron and steel combined, of whatever shape, or in whatever stage of manufacture, not specially provided for in this act, two and three-tenths cents per pound: Provided. That no forgings of iron or steel, or forgings of iron and steel combined, by whatever process made, shall pay a less rate of duty than forty-five per centum ad valorem.

Old law: Forgings of iron and steel, or forged iron, of whatever shape, or in whatever stage of manufacture, not specially enumerated or provided for in this act, two and one-half cents per pound.

140. Hoop, or band, or scroll, or other iron or steel, valued at three cents per pound or less, eight inches or less in width, and less than three-eighths of one inch thick and not thinner than number ten wire gauge, one cent per pound; thinner than number ten wire gauge and not thinner than number twenty wire gauge, one and one-tenth cents per pound; thinner than number twenty wire gauge, one and three-tenths cents per pound: Provided, That hoop or band iron, or hoop or band steel, cut to length, or wholly or partially manufactured into hoops or ties for baling purposes, barrel hoops of iron or steel, and hoop or band iron or hoop or band steel flared, splayed or punched, with or without buckles or fastenings, shall pay two-tenths of one cent per pound more duty than that imposed on the hoop or band iron or steel from which they are made.

Old law: Hoop, or band, or scroll, or other iron, eight inches or less in width, and not thinner than number ten wire gauge, one cent per pound; thinner than number ten wire gauge, and not thinner than number twenty wire gauge, one and two-tenths of one cent per pound; thinner than number twenty wire gauge, one and four tenths of one cent per pound: Provided, That all articles not specially enumerated or provided for in this act, whether wholly or partly manufactured, made from sheet, plate, hoop, band or scroll iron herein provided for, or of which such sheet, plate, hoop, band, or scroll iron shall be the material of chief value, shall pay one-fourth of one cent per pound more duty than that imposed on the iron from which they are made, or which shall be such material of chief value. If steel, forty-five per centum: Iron and steel cotton-ties, or hoops for bailing purposes, not thinner than number twenty wire gauge, thirty-five per centum ad valorem.

If steel, forty-five per centum: Sheet iron, common or black, thinner than one inch and one-half and not thinner than number twenty wire gauge, one and one-tenth of one cent per pound; thinner than number twenty wire gauge and not thinner than number twenty-five wire gauge, one and two-tenths of one cent per pound; thinner than number twenty-five wire gauge and not thinner than number twenty-nine wire gauge, one and five-tenths of one cent per pound; thinner than number twentynine wire gauge, and all iron commercially known as common or black taggers iron, whether put up in boxes or bundles or not, thirty per centum ad valorem.

141. Railway-bars, made of iron or steel, and railway-bars made in part of steel, T-rails, and punched iron or steel flat rails, sixtenths of one cent per pound.

Old law: Iron or steel tee rails, weighing not over twenty-five pounds to the yard, nine-tenths of one cent per pound; iron or steel flat rails, punched, eight-tenths of one cent per pound. Iron railway bars, weighing more than twenty-five pounds to the yard, seven-tenths of one cent per pound.

Steel railway-bars and railway bars made in part of steel, weighing more than twenty-five pounds to the yard, seventeen dollars per ton.

142. Sheets of iron or steel, common or black, including all iron or steel commercially known as common or black taggers iron or steel, and skelp iron or steel, valued at three cents per pound or less: Thinner than number ten and not thinner than number twenty wire gauge, one cent per pound; thinner than number twenty wire gauge, and not thinner than number twenty-five wire gauge, one and onetenth cents per pound; thinner than number twenty-five wire gauge, one and four-tenths cents per pound; corrugated or crimped, one and four-tenths cents per pound: Provided, That all common or black sheet-iron or sheet-steel not thinner than number ten wire gauge shall pay duty as plate iron or plate steel.

Old law: Sheet iron, common or black, thinner than one inch and one-half and not thinner than number twenty wire gauge, one and one-tenth of one cent per pound; thinner than number twenty wire gauge and not thinner than number twenty-five wire gauge, one and two-tenths of one cent per pound; thinner than number twenty-five wire gauge and not thinner than number twenty-nine wire gauge, one and five-tenths of one cent per pound; thinner than number twenty-nine wire gauge, and all iron commercially known as common or black taggers iron, whether put up in boxes or bundles or not, thirty per centum ad valorem.

143. Alliron or steel sheets or plates, and all hoop, band, or scroll iron or steel, excepting what are known commercially as tin plates, terne plates, and taggers tin, and hereinafter provided for, when galvanized or coated with zinc or spelter, or other metals, or any alloy of those metals, shall pay three-fourths of one cent per pound more duty than the rates imposed by the preceding paragraph upon the corresponding gauges, or forms, of common or black sheet or taggers iron or steel; and on and after July first, eighteen hundred and ninety one, all iron or steel sheets, or plates, or taggers iron coated with tin or lead or with a mixture of which these metals or either of them is a component part, by the dipping or any other process, and commercially known as tin plates, terne plates, and taggers tin, shall pay two and two-tenths cents per pound: Provided, That on and after July first, eighteen hundred and ninety-one, manufactures of which tin, tin plates, terne plates, taggers tin, or either of them, are component materials of chief value, and all articles, vessels or wares manufactured, stamped or drawn from sheet-iron or sheet-steel, such material being the component of chief value, and coated wholly or in part with tin or lead or a mixture of which these metals or either of them is a component part, shall pay a duty of fiftyfive per centum ad valorem: Provided, That on and after October first, eighteen hundred and ninety-seven, tin plates and terne plates lighter in weight than sixty-three pounds per hundred square feet shall be admitted free of duty, unless it shall be made to appear to the satisfaction of the President (who shall thereupon by proclamation make known the fact) that the aggregate quantity of such plates lighter than sixty-three pounds per hundred square feet produced in the United States during either of the six years next preceding June thirtieth, eighteen hundred and ninety-seven, has equaled one-third the amount of such plates imported and entered for consumption during any fiscal year after the passage of this act, and prior to said October first, eighteen hundred and ninety-seven: Provided, That the amount of such plates manufactured into articles exported, and upon which a drawback shall be paid, shall not be included in ascertaining the amount of such importations: And pro

vided further, That the amount or weight of sheet iron or sheet steel manufactured in the United States and applied or wrought in the manufacture of articles or wares tinned or terne-plated in the United States, with weight allowance as sold to manufacturers or others, shall be considered as tin and terne plates produced in the United States within the meaning of this act.

Old law: And provided, That on all such iron and steel sheets or plates aforesaid, excepting on what are known commercially as tin-plates, terne-plates, and taggers' tin, and hereafter provided for, when galvanized or coated with zinc or spelter, or other metals, or any alloy of those metals, three-fourths of one cent per pound additional.

Iron or steel sheets, or plates, or taggers iron, coated with tin or lead, or with a mixture of which these metals is a component part, by the dipping or any other process, and commercially known as tin-plates, terne-plates, and taggers tin, one cent per pound; corrugated or crimped sheet-iron or steel, one and fourtenths of one cent per pound.

Manufactures of tin, forty-five per centum.

144. Sheet-iron or sheet-steel, polished, planished, or glanced, by whatever name designated, two and one-half cents per pound: Provided, That plate or sheet or taggers iron or steel, by whatever name designated, other than the polished, planished, or glanced herein provided for, which has been pickled or cleaned by acid, or by any other material or process, or which is cold-rolled, smoothed only, not polished, shall pay one-quarter of one per cent per pound more duty than the corresponding gauges of common or black sheet or taggers iron or steel..

Old law: The words in italics in this paragraph are new matter. 145. Sheets or plates of iron or steel, or taggers iron or steel, coated with tin or lead, or with a mixture of which these metals, or either of them, is a component part, by the dipping or any other process, and commercially known as tin plates, terne plates, and taggers tin, one cent per pound until July first, eighteen hundred and ninety-one.

146. Steel ingots, cogged ingots, blooms, and slabs, by whatever process made; die blocks or blanks; billets and bars and tapered or beveled bars; steamer, crank, and other shafts; shafting; wrist or crank pins; connecting-rods and piston-rods; pressed, sheared, or stamped shapes; saw-plates, wholly or partially manufactured; hammer-molds or swaged steel; gun-barrel molds not in bars; alloys used as substitutes for steel tools; all descriptions and shapes of dry sand, loam, or iron-molded steel castings; sheets and plates not specially provided for in this act; and steel in all forms and shapes not specially provided for in this act; all of the above valued at one cent per pound or less, four-tenths of one cent per pound; valued above one cent and not above one and four-tenths cents per pound, five-tenths of one cent per pound; valued above one and four-tenths cents and not above one and eight-tenths cents per pound, eighttenths of one cent per pound; valued above one and eight-tenths cents and not above two and two-tenths cents per pound, nine-tenths of one cent per pound; valued above two and two-tenths cents, and not above three cents per pound, one and two-tenths cents per pound; valued above three cents and not above four cents per pound, one and six-tenths cents per pound; valued above four cents and not above seven cents per pound, two cents per pound; valued above seven cents and not above ten cents per pound, two and eight-tenths

« ПретходнаНастави »