Слике страница
PDF
ePub

vided further, That the amount or weight of sheet iron or sheet steel manufactured in the United States and applied or wrought in the manufacture of articles or wares tinned or terne-plated in the United States, with weight allowance as sold to manufacturers or others, shall be considered as tin and terne plates produced in the United States within the meaning of this act.

Old law: And provided, That on all such iron and steel sheets or plates aforesaid, excepting on what are known commercially as tin-plates, terne-plates, and taggers' tin, and hereafter provided for, when galvanized or coated with zinc or spelter, or other metals, or any alloy of those metals, three-fourths of one cent per pound additional.

Iron or steel sheets, or plates, or taggers iron, coated with tin or lead, or with a mixture of which these metals is a component part, by the dipping or any other process, and commercially known as tin-plates, terne-plates, and taggers tin, one cent per pound; corrugated or crimped sheet-iron or steel, one and fourtenths of one cent per pound.

Manufactures of tin, forty-five per centum.

144. Sheet-iron or sheet-steel, polished, planished, or glanced, by whatever name designated, two and one-half cents per pound: Provided, That plate or sheet or taggers iron or steel, by whatever name designated, other than the polished, planished, or glanced herein provided for, which has been pickled or cleaned by acid, or by any other material or process, or which is cold-rolled, smoothed only, not polished, shall pay one-quarter of one per cent per pound more duty than the corresponding gauges of common or black sheet or taggers iron or steel.

Old law: The words in italics in this paragraph are new matter. 145. Sheets or plates of iron or steel, or taggers iron or steel, coated with tin or lead, or with a mixture of which these metals, or either of them, is a component part, by the dipping or any other process, and commercially known as tin plates, terne plates, and taggers tin, one cent per pound until July` first, eighteen hundred and ninety-one.

146. Steel ingots, cogged ingots, blooms, and slabs, by whatever process made; die blocks or blanks; billets and bars and tapered or beveled bars; steamer, crank, and other shafts; shafting; wrist or crank pins; connecting-rods and piston-rods; pressed, sheared, or stamped shapes; saw-plates, wholly or partially manufactured; hammer-molds or swaged steel; gun-barrel molds not in bars; alloys used as substitutes for steel tools; all descriptions and shapes of dry sand, loam, or iron-molded steel castings; sheets and plates not specially provided for in this act; and steel in all forms and shapes not specially provided for in this act; all of the above valued at one cent per pound or less, four-tenths of one cent per pound; valued above one cent and not above one and four-tenths cents per pound, five-tenths of one cent per pound; valued above one and four-tenths cents and not above one and eight-tenths cents per pound, eighttenths of one cent per pound; valued above one and eight-tenths cents and not above two and two-tenths cents per pound, nine-tenths of one cent per pound; valued above two and two-tenths cents, and not above three cents per pound, one and two-tenths cents per pound; valued above three cents and not above four cents per pound, one and six-tenths cents per pound; valued above four cents and not above seven cents per pound, two cents per pound; valued above seven cents and not above ten cents per pound, two and eight-tenths

cents per pound; valued above ten cents and not above thirteen cents per pound, three and one-half cents per pound; valued above thirteen cents and not above sixteen cents per pound, four and twotenths cents per pound; valued above sixteen cents per pound, seven cents per pound.

WIRE

Old law: Steel ingots, cogged ingots, blooms, and slabs, by whatever process made; die blocks or blanks; billets and bars and tapered or beveled bars; bands, hoops, strips, and sheets of all gauges and widths; plates of all thicknesses and widths; steamer, crank, and other shafts; wrist or crank pins; connecting-rods and piston-rods; pressed, sheared, or stamped shapes, or blanks of sheet or plate steel, or combination of steel and iron, punched or not punched; hammer-molds or swaged steel; gun-molds, not in bars; alloys used as substitutes for steel tools; all descriptions and shapes of dry sand, loam, or iron-molded steel castings, all of the above classes of steel not otherwise specially provided for in this act, valued at four cents a pound or less, forty-five per centum ad valorem; above four cents a pound and not above seven cents per pound, two cents per pound; valued above seven cents and not above ten cents per pound, two and three-fourths cents per pound; valued at above ten cents per pound, three and one-fourth cents per pound:

147. Wire rods: Rivet, screw, fence, and other iron or steel wire rods, and nail rods, whether round, oval, flat, square, or in any other shape, in coils or otherwise, not smaller than number six wire gauge, valued at three and half cents or less per pound, six-tenths of one cent per pound; and iron or steel, flat, with longitudinal ribs for the manufacture of fencing, valued at three cents or less per pound, six-tenths of one cent per pound: Provided, That all iron or steel rods, whether rolled or drawn through dies, smaller than number six wire gauge, shall be classed and dutiable as wire.

Old law: Iron or steel rivet, screw, nail, and fence, wire rods, round, in coils and loops, not lighter than number five wire gauge, valued at three and one-half cents or less per pound, six-tenths of one cent per pound. Iron or steel, flat, with longitudinal ribs, for the manufacture of fencing, six-tenths of a cent per pound.

148. Wire: Wire made of iron or steel, not smaller than number ten wire gauge, one and one-fourth cents per pound; smaller than number ten, and not smaller than number sixteen wire gauge, one and three-fourths cents per pound; smaller than number sixteen and not smaller than number twenty-six wire gauge, two and one-fourth cents per pound; smaller than number twenty-six wire gauge, three cents per pound: Provided, That iron or steel wire covered with cotton, silk, or other material, and wires or strip steel, commonly known as crinoline wire, corset-wire, and hat-wire, shall pay a duty of five cents per pound: And provided further, That flat steel wire, or sheet steel in strips, whether drawn through dies or rolls, untempered or tempered, of whatsoever width, twenty-five one thousandths of an inch thick or thinner (ready for use or otherwise), shall pay a duty of fifty per centum ad valorem: And provided further, That no article made from iron or steel wire, or of which iron or steel wire is a component part of chief value, shall pay a less rate of duty than the iron or steel wire from which it is made either wholly or in part: And provided further, That iron or steel

wire cloths, and iron or steel wire nettings made in meshes of any form, shall pay a duty equal in amount to that imposed on iron or steel wire used in the manufacture of iron or steel wire cloth, or iron or steel wire nettings, and two cents per pound in addition thereto.

Old law: Smaller than number ten gauge, one and one-half and two cents per pound; number ten to number sixteen gauge, two cents; number sixteen to number twenty-six gauge, two and one-half cents; smaller, three cents. Provided, That iron or steel wire covered with cotton, silk, or other material, and wire commonly known as crinoline, corset, and hat-wire, shall pay four cents per pound in addition to the foregoing rates: And provided further, That no article made from iron or steel wire, or of which iron or steel wire is a component part of chief value, shall pay a less rate of duty than the iron or steel wire from which it is made, either wholly or in part: And provided further, That iron or steel wire-cloths, and iron or steel wire-nettings, made in meshes of any form, shall pay a duty equal in amount to that imposed on iron or steel wire of the same gauge, and two cents per pound in addition thereto. There shall be paid on galvanized iron or steel wire (except fence wire) one-half of one cent per pound in addition to the rate imposed on the wire of which it is made. On iron wire-rope and wire-strand, one cent per pound in addition to the rates imposed on the wire of which it is made. On steel wire-rope and wire-strand, two cents per pound in addition to the rates imposed on the wire of which it is made.

There shall be paid on iron or steel wire coated with zinc or tin, or any other metal (except fence-wire and iron or steel, flat, with longitudinal ribs, for the manufacture of fencing), one-half of one cent per pound in addition to the rate imposed on the wire of which it is made; on iron wire rope and wire strand, one cent per pound in addition to the rate imposed on the wire of which it is made; on steel wire rope and wire strand, two cents per pound in addition to the rate imposed on the wire of which they or either of them are made: Provided further, That all iron or steel wire valued at more than four cents per pound shall pay a duty of not less than forty-five per centum ad valorem, except that cardwire for the manufacture of card clothing shall pay a duty of thirty-five per centum ad valorem.

GENERAL PROVISIONS.

149. No allowance or reduction of duties for partial loss or damage in consequence of rust or of discoloration shall be made upon any description of iron or steel, or upon any article wholly or partly manufactured of iron or steel, or upon any manufacture of iron and steel.

Old law did not contain words in italics. 150. All metal produced from iron or its malleable, of whatever description or for percentage of carbon contained therein, w tation, or converted, cast, or m ble, Bessemer, Clapp-Griffiths Siemens-Martin, or open-hea either, or by a combination of equivalents, or by any fusion iron or its ores a metal either g

[graphic]
[ocr errors]

res, which is cast and ithout regard to the produced by cemenores, by the cruciGilchrist, basic, equivalent of sses, or their oduces from ture, which

cents per pound; valued above ten cents and not above thirteen cents per pound, three and one-half cents per pound; valued above thirteen cents and not above sixteen cents per pound, four and twotenths cents per pound; valued above sixteen cents per pound, seven cents per pound.

WIRE

Old law: Steel ingots, cogged ingots, blooms, and slabs, by what-
ever process made; die blocks or blanks; billets and bars and
tapered or beveled bars; bands, hoops, strips, and sheets of all
gauges and widths; plates of all thicknesses and widths;
steamer, crank, and other shafts; wrist or crank pins; connect-
ing-rods and piston-rods; pressed, sheared, or stamped shapes,
or blanks of sheet or plate steel, or combination of steel and
iron, punched or not punched; hammer-molds or swaged steel;
gun-molds, not in bars; alloys used as substitutes for steel tools;
all descriptions and shapes of dry sand, loam, or iron-molded
steel castings, all of the above classes of steel not otherwise
specially provided for in this act, valued at four cents a pound
or less, forty-five per centum ad valorem; above four cents a
pound and not above seven cents per pound, two cents per
pound; valued above seven cents and not above ten cents per
pound, two and three-fourths cents per pound; valued at above
ten cents per pound, three and one-fourth cents per pound:

147. Wire rods: Rivet, screw, fence, and other iron or steel wire
rods, and nail rods, whether round, oval, flat, square, or in
any other shape, in coils or otherwise, not smaller than
number six wire gauge, valued at three and half cents or
less per pound, six-tenths of one cent per pound; and iron
or steel, flat, with longitudinal ribs for the manufacture of
fencing, valued at three cents or less per pound, six-tenths
of one cent per pound: Provided, That all iron or steel rods,
whether rolled or drawn through dies, smaller than number
six wire gauge, shall be classed and dutiable as wire.

Old law: Iron or steel rivet, screw, nail, and fence, wire rods, round,
in coils and loops, not lighter than number five wire gauge,
valued at three and one-half cents or less per pound, six-tenths
of one cent per pound. Iron or steel, flat, with longitudinal
ribs, for the manufacture of fencing, six-tenths of a cent per
pound.

148. Wire: Wire made of iron or steel, not smaller than number ten
wire gauge, one and one-fourth cents per pound; smaller
than number ten, and not smaller than number sixteen wire
gauge, one and three-fourths cents per pound; smaller than
number sixteen and not smaller than number twenty-six
wire gauge, two and one-fourth cents per pound; smaller
than number twenty-six wire gauge, three cents per pound:
Provided, That iron or steel wire covered with cotton, silk,
or other material, and wires or strip steel, commonly known
as crinoline wire, corset-wire, and hat-wire, shall pay a duty
of five cents per pound: And provided further, That flat
steel wire, or sheet steel in strips, whether drawn through
dies or rolls, untempered or tempered, of whatsoever width,
twenty-five one thousandths of an inch thick or thinner
(ready for use or otherwise), shall pay a duty of fifty per
centum ad valorem: And provided further, That no article
made from iron or steel wire, or of which iron or steel wire
is a component part of chief value, shall pay a less rate of
duty than the iron or steel wire from which it is made either
wholly or in part: And provided further, That iron or steel

[merged small][merged small][merged small][merged small][merged small][merged small][ocr errors]

wire cloths, and iron or steel wire nettings made in meshes of any form, shall pay a duty equal in amount to that imposed on iron or steel wire used in the manufacture of iron or steel wire cloth, or iron or steel wire nettings, and two cents per pound in addition thereto.

Old law: Smaller than number ten gauge, one and one-half and two cents per pound; number ten to number sixteen gauge, two cents; number sixteen to number twenty-six gauge, two and one-half cents; smaller, three cents. Provided, That iron or steel wire covered with cotton, silk, or other material, and wire commonly known as crinoline, corset, and hat-wire, shall pay four cents per pound in addition to the foregoing rates: And provided further, That no article made from iron or steel wire, or of which iron or steel wire is a component part of chief value, shall pay a less rate of duty than the iron or steel wire from which it is made, either wholly or in part: And provided further, That iron or steel wire-cloths, and iron or steel wire-nettings, made in meshes of any form, shall pay a duty equal in amount to that imposed on iron or steel wire of the same gauge, and two cents per pound in addition thereto. There shall be paid on galvanized iron or steel wire (except fence wire) one-half of one cent per pound in addition to the rate imposed on the wire of which it is made. On iron wire-rope and wire-strand, one cent per pound in addition to the rates imposed on the wire of which it is made. On steel wire-rope and wire-strand, two cents per pound in addition to the rates imposed on the wire of which it is made.

There shall be paid on iron or steel wire coated with zinc or tin, or any other metal (except fence-wire and iron or steel, flat, with longitudinal ribs, for the manufacture of fencing), one-half of one cent per pound in addition to the rate imposed on the wire of which it is made; on iron wire rope and wire strand, one cent per pound in addition to the rate imposed on the wire of which it is made; on steel wire rope and wire strand, two cents per pound in addition to the rate imposed on the wire of which they or either of them are made: Provided further, That all iron or steel wire valued at more than four cents per pound shall pay a duty of not less than forty-five per centum ad valorem, except that cardwire for the manufacture of card clothing shall pay a duty of thirty-five per centum ad valorem.

GENERAL PROVISIONS.

149. No allowance or reduction of duties for partial loss or damage in consequence of rust or of discoloration shall be made upon any description of iron or steel, or upon any article wholly or partly manufactured of iron or steel, or upon any manufacture of iron and steel.

Old law did not contain words in italics.

150. All metal produced from iron or its ores, which is cast and malleable, of whatever description or form, without regard to the percentage of carbon contained therein, whether produced by cementation, or converted, cast, or made from iron or its ores, by the crucible, Bessemer, Clapp-Griffiths, pneumatic, Thomas-Gilchrist, basic, Siemens-Martin, or open-hearth process, or by the equivalent of either, or by a combination of two or more of the processes, or their equivalents, or by any fusion or other process which produces from iron or its ores a metal either granular or fibrous in structure, which

« ПретходнаНастави »